Update Samsung Galaxy A5 to Android 5.0.2 A500FXXU1BPA4 Lollipop


You can now Update Samsung Galaxy A5 with Android 5.0.2 Lollipop. As the update is released in stages and always takes time to reach to all devices around the globe so it is best that you manually flash it on your device with the help of this tutorial. Waiting is definitely not an option for you if you are a tech savvy and really want your hands on the latest Android 5.0.2 update. Odin app is best to assist you flashing the update unofficially on your Samsung Galaxy A5.

In this age of advanced technology, your device must be updated. Don’t hesitate to use Odin method to get the updates on your Android device. This tutorial, on how to Update Samsung Galaxy A5 to Android 5.0.2, is very precise and to the point to eliminate any confusion or ambiguities. Also, it is recommended that you read the following precautionary key points before getting started with the tutorial.


Samsung Galaxy A5 Drivers:

You’ll be connecting your device to the Computer, so it is recommended that you have installed the latest USB drivers for Samsung Galaxy A5 properly. For those who do not have done it already, download the USB Drivers from the link below and then proceed with the tutorial.

Make a Backup of Samsung Galaxy A5:

It is recommended that you make a full backup of your device before proceeding with this guide on How to Update Samsung Galaxy A5 to Android 5.0.2 A500FXXU1BPA4 Lollipop. Anything can go wrong during the process, so you can later on restore your device to current state. Just follow the tutorials listed below in order to fully backup your device:

Pre-Tutorial Stuff:

  • This guide is only for Samsung Galaxy A5, DO NOT try this on any other device or else you’ll end up bricking it!
  • This is not a guide for Flashing Custom ROM, so you don’t need your device to be rooted. However, if your device is rooted, you’ll lose the Root access after flashing this Official Firmware.
  • Your device must be at least 70% charge to prevent turning off in the middle and increasing the chances of bricking it.
  • Make sure USB Debugging is enabled. -> Go to Settings > Developer Options > Turn On USB Debugging. If the Developer Options do not show up in your settings, go to About, scroll down and tap on Build Number seven times and a Message will pop up saying that You are a Developer now! Go back to Settings and you’ll have the Developer Options now.

How to Update Samsung Galaxy A5 to Android 5.0.2 A500FXXU1BPA4 Lollipop

Step 1: Download the following files:

  1. A500FXXU1BPA4 Android 5.0.2 firmware
  2. Odin3 v3.10.6

Step 2: Extract the contents in the zip archive and save the files on your PC then switch off your device.

Step 3: Boot it in Download Mode by pressing and holding Volume Down + Home + Power Button simultaneously.

Step 4: Launch the Odin.exe on your PC and Connect the phone to computer via usb cable and wait for the device to be added by Odin, if no device is detected you need to reinstall the Samsung usb drivers. If your device is detected, you’ll get the following message in Odin:


Step 5: Go back to Odin and click on the AP button and locate the A500FXXU1BPA4 tar.md5 firmware update file and load it in ODIN.

Step 6: Confirm the updating process by hitting the START button.

Step 7: After the update is completed by ODIN you will see the PASS alert as shown in the image below. The phone should reboot in normal mode, too.


Note: First boot will take a bit long, so don’t panic and be patient.