close
LG-G3

This post will guide you on How to Enter Recovery Mode on LG G3. is one of the best smartphones out there and was LG’s Flagship in 2014. It features an impressive 5.5 Inch True HD-IPS+ LCD display with Quad HD (1440 x 2560) resolution, 534 ppi pixel density, and Gorilla Glass 3 protection along with a Snapdragon 801 SoC with four Krait 400 cores clocked at 2.5 GHz and Adreno 330 GPU. LG G3 comes with 2 different RAMs according to its storage memory, the 16 GB version comes with a 2 GB RAM and 32 GB version comes with a 3 GB RAM. Along with that, LG G3 features a 13 MP Back Camera and a 2.1 MP Front Camera.

LG G3 comes with a pre-installed stock Recovery as is the case with every Android device out there. Recovery Mode helps in performing certain tasks like Wiping Cache Partition, performing a Factory Data Reset, view Recovery logs if your phone doesn’t boot up etc. The Stock recovery in LG G3 doesn’t have much of the options as compared to a Custom Recovery such as ClockworkMod (CWM) Recovery or Team Win Recovery Project (TWRP). Installing a Custom Recovery on your device gives you access to so many things like Flashing a or Custom Kernel to improve your device’s user experience or boost up the speed and battery timing etc. Even though LG G3 is an impressive android device, however, you can make its user experience more exciting by flashing a Custom ROM or kernel. But for that you must know Enter Recovery Mode on LG G3 in order to perform any development tasks such as those listed above. There are 3 methods available to enter recovery mode on LG G3, I have written a detailed step-by-step guide on all 3 of these methods. Take a look at them below. But, before we proceed, it is recommended that you take a look at the following precautionary tips.

lg-g3-recover-mode

LG G3 Drivers:

You’ll be connecting your device to the Computer, so it is recommended that you have installed the latest USB drivers for LG G3 properly. For those who do not have done it already, download the USB Drivers from the link below and then proceed with the tutorial.

Make a Backup of LG G3:

It is recommended that you make a full backup of your device before proceeding with this guide on How to Enter Recovery Mode on LG G3. Anything can go wrong during the process, so you can later on restore your device to current state. Just follow the tutorials listed below in order to fully backup your device:

Pre-Tutorial Stuff:

  • This guide is only for LG G3, DO NOT try this on any other device or else you’ll end up bricking it!
  • Your device must be at least 70% charged
  • Make sure USB Debugging is enabled. -> Go to Settings > Developer Options > Turn On USB Debugging. If the Developer Options do not show up in your settings, go to About, scroll down and tap on Build Number seven times and a Message will pop up saying that You are a Developer now! Go back to Settings and you’ll have the Developer Options now.

How to Enter Recovery Mode on LG G3

1. Using Hardware Buttons

Please note that if your LG G3 is running a Stock Recovery, then this method will also your device, so it is recommended that you make a backup of your files using the tutorials listed above before proceeding with this method.

Step 1: First of all, turn off your device. Either Press and Hold Power button for 5-6 seconds or just press Power Button once and choose Power Off option.

Step 2: Once your device is powered off completely, press and hold Power Button and Volume Down Button together until the LG Logo appears.

Step 3: Once the LG Logo appears, release the buttons and immediately press both of the buttons again until you see Hard Reset Menu.

Step 4: Press the Power Button to confirm and perform a Hard Reset (this will wipe your data). Your device will enter the Recovery Mode after that.

2. Using ADB Commands

For this method, you’ll need an access to the computer and have properly installed on it -> How to Install Android SDK or ADB on Windows

Step 1: Enable USB Debugging from Developer Options if you haven’t already done it.

Step 2: Connect your LG G3 via USB Cable with Computer and navigate to the Android SDK folder.

Step 3: In Android SDK folder, press and hold Shift button then right click on empty space and select Open command window here.

Step 4: Execute the following command in Command Prompt:

adb reboot recovery

That’s it! Your LG G3 will now reboot into Recovery Mode.

3. Using a Third-Party App

For this method to work, your LG G3 should be rooted. All you have to do is install an App from Google Play store and reboot into recovery using that App.

Step 1: Install Quick Boot App from Google Play Store.

Step 2: Open up Quick Boot app and select Recovery.

Step 3: Your device will now Boot into Recovery Mode.

That was all on How to Enter Recovery Mode on LG G3. We recommend using the second method i.e. Using ADB Command as it does not require root access and it won’t be hard resetting your LG G3!

Tags : android how toG3LG
Hassan Imtiaz

The author Hassan Imtiaz

Professional Blogger, Web Developer and a Tech Geek! Loves to write about Tech Stuff especially Android! Co-Founder and Author at 221bTech.com.

Leave a Response