close
samsung-galaxy-s4

You can now Flash 6.0.1 ROM on LTE I9505. Samsung Galaxy S4 must now be ready to get the CRdroid Marshmallow Android 6.0 update. This brings CM13 model features to enhance the performance of Galaxy S4 LTE I9505. You can get a detailed and very convenient tutorial below on flash the CR Droid MM 6.0.1 ROM update on Samsung Galaxy S4. Dev team also offers support and community help in order to assist the users getting update their devices.

Having a Wi-Fi enabled smart gadget with all the latest applications, super cool software and stylish outlook is a dream of every individual nowadays. But protecting and maintaining a device is an art. Updating and allow the updates on your device is actually the best way to keep your device classic all the time. This tutorial helps you in maintaining the true spirit of your smart device by enabling you get that crDroid Update on Samsung Galaxy S4. In this guide, you will get to know How to Flash crDroid Marshmallow 6.0.1 ROM on Galaxy S4 LTE I9505. Before we move forward with the tutorial, there are few precautionary things that you must keep in mind. I have written them for your convenience below so that the process goes as smoothly as possible!

crdroid-6.0.1-marshmallow

Samsung Galaxy S4 LTE I9505 Drivers:

You’ll be connecting your device to the Computer, so it is recommended that you have installed the latest USB drivers for Samsung Galaxy S4 LTE I9505 properly. For those who do not have done it already, download the USB Drivers from the link below and then proceed with the tutorial.

Make a Backup of Samsung Galaxy S4 LTE I9505:

It is recommended that you make a full backup of your device before proceeding with this guide on How to Flash crDroid Marshmallow 6.0.1 ROM on Galaxy S4 LTE I9505. Anything can go wrong during the process, so you can later on restore your device to current state. Just follow the tutorials listed below in order to fully backup your device:

Pre-Tutorial Stuff:

  • This guide is only for Samsung Galaxy S4 LTE I9505, DO NOT try this on any other device or else you’ll end up bricking it!
  • Make sure your Samsung Galaxy S4 LTE I9505 is Rooted and has ClockworkMod or TWRP Custom recovery installed. We’ll go with the ClockworkMod in this tutorial.
  • Your device must be at least 70% charge to prevent turning off in the middle and increasing the chances of bricking it.
  • Make sure USB Debugging is enabled. -> Go to Settings > Developer Options > Turn On USB Debugging. If the Developer Options do not show up in your settings, go to About, scroll down and tap on Build Number seven times and a Message will pop up saying that You are a Developer now! Go back to Settings and you’ll have the Developer Options now.

How to Flash crDroid Marshmallow 6.0.1 ROM on Galaxy S4 LTE I9505

Step 1: Download the following files:

  1. crDroid Custom ROM File
  2. Download GApps

Step 2: After that, connect your device with your computer with the help of the USB cable and move the downloaded files to your device.

Step 3: Unplug your device and then turn it off.

Step 4: When it is turned off, boot it in to Recovery Mode by pressing and holding Volume Up + Home + Power Button simultaneously.

Samsung-device-boot-recovery

Step 5: When your device successfully boots into recovery mode, create a Nandroid backup by going to Advanced > Backup and Restore > Backup to /sdcard.

CWM-Samsung-nandroid-backup

Step 6: Now clean up the storage system of your device; so, just select wipe data/factory reset as show in the image below.

CWM-Samsung-wipe-data-factory-reset

Note: The CWM Recovery in your device may not be as same as shown in the images here. However, functions are almost the same in every version of CWM Recovery.

Step 7: After that, select install zip from the recovery menu.

CWM-Samsung-install-zip

Step 8: Followed by choose zip from sd card and select the zip file that you downloaded in Step 1. Installation will start.

CWM-Samsung-choose-zip-from-sdcard

Step 9: Wait for the installation to complete. Once it is complete, repeat the last 2 steps to flash GApps or Google Apps. Or you can follow the tutorial below:

Step 10: After you’re done with everything, go back to the recovery menu and select wipe cache partition followed by wipe dalvik cache.

CWM-Samsung-wipe-cache-dalvik-cache

Step 11: In the end, from main menu of recovery select reboot system now.

CWM-Samsung-Reboot-system

Note: First boot will take a bit of time, so just be patient. If your device gets stuck in bootloop, turn it off, boot into recovery mode, perform a factory reset and wipe cache. Then reboot it. Hopefully it will turn on!

Your Samsung Galaxy S4 LTE will now have crDroid Marshmallow 6.0.1 Custom ROM!

Tags : Android 6.0.1android how tocrDroidCustom ROMGalaxy S4Samsung
Hassan Imtiaz

The author Hassan Imtiaz

Professional Blogger, Web Developer and a Tech Geek! Loves to write about Tech Stuff especially Android! Co-Founder and Author at 221bTech.com.

Leave a Response