close
Set-BIOS-UEFI-password-in-Windows-10-pic1_thumb

The operating system offers login password and account password in order for only you to have access to your PC. But the account password can be easily bypassed with or without help of third party tools. Which basically means that it can’t protect your confidential data saved on your 10 PC.

There are couple of ways out there to protect your data (like encryption) on your Windows 10 PC but setting a BIOS or UEFI password is one of better ways out there to protect your data.

What’s BIOS or UEFI password?

A BIOS or UEFI password stops your PC from booting without the right password.  That is, one can use a bootable USB or CD or any other method to boot in to your PC without entering the BIOS or UEFI password. The BIOS or UEFI password prompt appears right after you turn on the PC. Without entering the correct BIOS or UEFI password, a user can’t even access BIOS or UEFI settings.

When this password is set one cannot use third party tools to access your PC. Even users can’t install another operating system when BIOS or UEFI password is set.

if someone has access to your PC protected with BIOS/UEFI password, he/she might be able to access your data by removing the hard drive or SSD and then connecting the same to a different PC. Besides that, the BIOS or UEFI password can also be reset if someone has physical access to your PC but the process is not definitely easy, especially on notebooks and tablets. This means that, the BIOS/UEFI password adds an extra layer of security to your data and is not the ultimate solution to protect your data.

UEFI or BIOS password?

If you purchase a PC preloaded with Windows 8, 8.1 or 10, then your PC will support UEFI and you need to set UEFI password. If it doesn’t then it will support BIOS for sure.

Set-BIOS-UEFI-password-in-Windows-10-pic1_thumb

The BIOS or UEFI password setting process is not exactly the same for all computers. The process varies from manufacturer to manufacture but the process is more or less the same for most PCs.

Method 1 of 2

Setting BIOS password on a Windows 10 PC

Step 1: Turn your PC on and press Del, F2, Esc, F10, or F12 key to get in to the BIOS. The key to get in to BIOS varies from PC to PC but the above mentioned ones are commonly used. So try one after another and if one of them work please check your PC’s user manual or contact the manufacturer to know the right key.

Step 2: Once the settings open, use the arrow keys to navigate to the security or password section.

Step 3: Under Security or Password section, look for any entry named Set supervisor password, User password, System password, or a similar option. Select the correct option and set a strong password.

Set-bios-or-UEFI-password-in-Windows-10-pic2_thumb

* If your BIOS has both supervisor password as well as user password option as seen in the picture below, it’s a good idea to set both supervisor password as well as user password.

The supervisor password protects users from accessing BIOS whereas the user password restricts users from booting in to your PC. In some PC’s user password acts as both supervisor and user password. So we suggest you set both password and make sure that you see the password prompt before accessing BIOS as well before booting in to the operating system.

NOTE: Some manufacturers also include additional security so make sure you are configured to the best security settings.

Set-bios-or-UEFI-password-in-Windows-10-pic3_thumb

Finally, don’t forget to save the changes made to your BIOS settings. On most PCs pressing the F10 key saves the settings. Check on the BIOS screen for directions or key to save the settings.

Reboot your PC to see the BIOS password prompt.

Set UEFI password on a Windows 10 PC

Step 1: Open UEFI firmware settings. The process to access UEFI firmware settings is completely different from accessing BIOS.

Step 2: When you are at the UEFI firmware settings screen, look for security or password section. On some PCs, you need to navigate to settings section to see security options.

Step 3: When you are at the UEFI firmware settings screen, look for security or password section. On some PCs, you need to navigate to settings section to see security options.

 

 

Tags : Windows 10windows 10 how to
Nooruddin Ahmed

The author Nooruddin Ahmed

An avid football fan. Lives for the weekend game.Aviation enthusiast. Believes in letting bygones be bygones.

Leave a Response